Usage

There are described various types of modules : USB devices , wireless devices and web devices. On this basis, it can be better choices what type of measurement is suitable.

USB devices

USB devices are connected with PC via USB cable. It is possible to connect up to 127 devices.

Measurement :
1. Install software and USB drivers
2. Connect USB device with PC
3. Run USB Measure.exe

Advantages :
- simple hardware
- data transfer to PC is very fast and reliable
- power supply directly from PC

USB device is directly connected to PC. We also support 100% galvanically isolated device from PC.

Wireless devices

Measurement :
1. connect receiver with PC
2. turn on wireless voltmeter ( or other device )
3. run RF Measure.exe

Advantages :
- enables remote measurement of electrical values
- data are transmitted in the compressed packets
- allows you to connect over 100 devices

Wireless device sends data to the receiver. Receiver receives these data and through a USB cable and sends data to a PC.

Web devices - measurement over internet

Usage :
1. connect web device with +5V power supply and LAN
2. open web broser and connect to the web device
3. web device displays web site with data

Advantages :
- works without a PC
- connection with a device is via the internet
- measured voltage is isolated from PC

Web device measure data over the internet and sends them to the user. Data can be sent in both directions: from the user to device or vice versa.

Open and Practice Measurement with PC.